GROM's USB2-i MP3 kit is a digital interface that is designed to integrate USB Disk / Flash Drive / External Hard Drive / Mass Storage Device into your cars OEM stereo.
It provides a direct audio interface to a car stereo via the CD changer port. The Audio interface insures CD quality sound from MP3 / WMA files on a USB stick to your car stereo speakers.
It will allow you to "fool" your stereo into thinking that a fully featured CD changer is plugged in. This way you can have thousands of tracks divided into playlists or full shuffle mode if you wish. Endless amounts of music !
It's that simple:
• Transfer your MP3 / WMA / iTunes (AAC) files to a USB stick / disk / drive
• Connect GROM's USB2 car kit to your car stereo via the CD changer port
• Plug-in a USB stick /disk into the cable
• Plays MP3 / WMA / iTunes (AAC) files through the car audio system instantly
• Display MP3/WMA titles/artist/album (where stereo permits)
• Browse your music files using car stereo or steering wheel buttons (check the manual!)
• Navigates through directories and maps them to the disk buttons on your car stereo or steering wheel controls
• Provides additional AUX input via 3.5 mm port ( you will need to get a 3.5 mm male to male cable for that)
• Get CD quality sound directly to your car stereo
Main characteristics:
• Built-in high quality (18 bits, low noise) MP3 / WMA Decoder
• Supports USB Stick / flash drive / mass storage device / external hard drive
• Additional audio 3.5mm jack connection to connect any MP3/Phone/Audio player
• FAT 16/32 system supported with up to 32GB capacity
• Shuffle, scan, repeat through your MP3/WMA files
• Maps disks to root folders
• Direct connection with CD quality sound
• No battery required
• Full control by steering wheel or car stereo panel
• Playlist positions are preserved for several USB sticks
• Firmware upgradeable - universal interface fits many car makes
• 1 year manufactures warranty
The Package consists of:
• Car stereo adapter in metal enclosure
• OEM Compatible harness to connect to the back of the car stereo (or trunk connection)
• USB Type A Male / Type A Female 1.5m cable
• 3.5mm jack connection
• Installation manual
Installation Overview:
• Plugs in to the back of the Car Stereo. It uses CD changer or Extension port of your stereo.
• Plug-and-play operation
• No need to splice into factory wiring
How to connect the USB interface into a car
Important Installation Information:
Check to see which kit you need for your car on our vehicle application guide, then select your cable SKU from the dropdown box below.
If your car isn't compatible, we also have a large stock of aftermarket AUX / iPod input adapters for many other vehicles.
If you are unsure as to which kit you require then contact us and we will do our best to assist you.
Please Choose:
This product was added to our catalog on Thursday 11 September, 2008.
