Kiwi Wifi is a device which allows you to wirelessly connect to your vehicle's onboard computer via your iPhone / iPod Touch / iPad. It is compatible with most 1996* and later vehicles and installs in seconds. Connection is made through your vehicle's onboard diagnostic port (OBDII - all vehicles have this port, usually located around the drivers footwell).
When connected to an iPhone / iTouch / iPad or any other compatible device with compatible software, you will see in real time any available engine data and have the ability to check and cancel engine warning lights (This can cost £35 + at a dealer each time). Other functionality when using an iPhone includes GPS and acceleromitor information.
Connecting to your iPhone / iPod Touch is made by 802.11a/b/g connection in adHoc mode. It is compatible with apps such as Rev, FuzzyCar and DashCommand now available from the app store.
Features include fuel consumption MPG meter, check engine diagnostic tools, horsepower and torque calculations, gauge themes, race utilities and much more.
Download Rev Lite and FuzzyCar from the iPhone App Store now for FREE!
Features Include:
Works with iPhone, iPad, iPod Touch
Check Engine Scan Tool
MPG Gauges
Engine Sensors
Customizable Dashboard
Real-time Dyno
Data Logging
GPS Track
Skid Pad
Connects to your OBDII Port
Technical Specifications:
SSID: PLXDevices
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.7 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Plastic: Automotive Grade
Physical Dimensions: 70 x 32 x 15mm
3m OBDII cable
Built-in power switch
Additional Sensor Support: None
Note: This unit is upgradeable to Kiwi Wifi + iMFD.
The Package Consist of:
• Kiwi Wifi Unit
• OBDII connection
• Installation Manual - Download it here
Note: This module does not include any software!
Compatible with most 1996+ Vehicles
We are happy to refund you if the device is not compatible with your car.
Software compatible with this adapter is as follows: (Not included)
Diagnose engine trouble, read and reset your check engine light.
Do you like to go off-roading or rock crawling? The inclinometer functions as both a tilt meter and a slope meter. Give yourself a little more confidence when off road, showing the roll and pitch attitude of your vehicle. Handy in terrain where the horizon is not horizontal or when wheeling at night and you can't get a good visual reference. Easily toggle between two different modes of display.
A fully configurable dash designed to give you more information than stock instrument cluster.
Visually maps out your path as you drive around the race track. Displays your current location and whether you are accelerating or braking in clear and easy to see colors. Visually analyze different race track laps to see how acceleration and braking changed from lap to lap.
Professional skidpad showing real-time lateral, acceleration, and braking G forces. Clearly marked G-force circle visually plots the G forces and keeps a record that you can instantly understand. It also features indicators showing your maximum left, right, acceleration, and braking G forces.
FUZZYCar is an iPhone application that connects your cars computer (ECU) directly to the Internet using the Kiwi WiFi from PLX Devices. Using FUZZYCar, you can see all of the diagnostic sensors your car supports right on your iPhone, including Speed, RPMs, Oxygen Sensor data, and the status of your Check Engine Light. FUZZYCar can also diagnose the exact Diagnostic Trouble Codes (DTC) every time your check engine light comes on, and can even clear your check engine light immediately. Each copy of FUZZYCar also gives you a free account on fuzzyluke.com. Now you can keep track of multiple cars, and analyze all of your cars historical diagnostic data. You don't just get a one-time snapshot or spreadsheet, you get to keep track of it all using the FUZZYLUKE analysis engine. Your fuzzyluke.com account will also let you setup email alerts, so that you can keep track of problems as they occur in all of your cars.
PLX Logger 3.0 is free to download, however to use PLX Logger 3.0 with Kiwi Wifi, you'll need to purchase a license. What's nice about PLX Logger 3.0 is that it is compatible with the iPhone/iPod Touch app called DashCommand. Logged data from DashCommand can be downloaded into PLX Logger 3.0 for further detail review.
Kiwi Wifi is used to obtain OBDII data, however if additional sensors are required such as wideband air/fuel ratio, fluid temperature, you can daisy-chain up to 32 PLX Sensor Modules and read it simultaneously with PLX Logger 3.0. This brings the best of both worlds of OBDII interface and high performance dedicated sensors into one application.
*** As mentioned in Sunday Times ingear supplement on the 29th May***
Details:
Kiwi Wifi is a device which allows you to wirelessly connect to your vehicle's onboard computer via your iPhone / iPod Touch / iPad. It is compatible with most 1996* and later vehicles and installs in seconds. Connection is made through your vehicle's onboard diagnostic port (OBDII - all vehicles have this port, usually located around the drivers footwell).
When connected to an iPhone / iTouch / iPad or any other compatible device with compatible software, you will see in real time any available engine data and have the ability to check and cancel engine warning lights (This can cost £35 + at a dealer each time). Other functionality when using an iPhone includes GPS and acceleromitor information.
Connecting to your iPhone / iPod Touch is made by 802.11a/b/g connection in adHoc mode. It is compatible with apps such as Rev, FuzzyCar and DashCommand now available from the app store.
Features include fuel consumption MPG meter, check engine diagnostic tools, horsepower and torque calculations, gauge themes, race utilities and much more.
Download Rev Lite and FuzzyCar from the iPhone App Store now for FREE!
Features Include:
Works with iPhone, iPad, iPod Touch
Check Engine Scan Tool
MPG Gauges
Engine Sensors
Customizable Dashboard
Real-time Dyno
Data Logging
GPS Track
Skid Pad
Connects to your OBDII Port
Technical Specifications:
SSID: PLXDevices
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.7 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Plastic: Automotive Grade
Physical Dimensions: 70 x 32 x 15mm
3m OBDII cable
Built-in power switch
Additional Sensor Support: None
Note: This unit is upgradeable to Kiwi Wifi + iMFD.
The Package Consist of:
• Kiwi Wifi Unit
• OBDII connection
• Installation Manual - Download it here
Note: This module does not include any software!
Compatible with most 1996+ Vehicles
We are happy to refund you if the device is not compatible with your car.
Software compatible with this adapter is as follows: (Not included)
Diagnose engine trouble, read and reset your check engine light.
Do you like to go off-roading or rock crawling? The inclinometer functions as both a tilt meter and a slope meter. Give yourself a little more confidence when off road, showing the roll and pitch attitude of your vehicle. Handy in terrain where the horizon is not horizontal or when wheeling at night and you can't get a good visual reference. Easily toggle between two different modes of display.
A fully configurable dash designed to give you more information than stock instrument cluster.
Visually maps out your path as you drive around the race track. Displays your current location and whether you are accelerating or braking in clear and easy to see colors. Visually analyze different race track laps to see how acceleration and braking changed from lap to lap.
Professional skidpad showing real-time lateral, acceleration, and braking G forces. Clearly marked G-force circle visually plots the G forces and keeps a record that you can instantly understand. It also features indicators showing your maximum left, right, acceleration, and braking G forces.
FUZZYCar is an iPhone application that connects your cars computer (ECU) directly to the Internet using the Kiwi WiFi from PLX Devices. Using FUZZYCar, you can see all of the diagnostic sensors your car supports right on your iPhone, including Speed, RPMs, Oxygen Sensor data, and the status of your Check Engine Light. FUZZYCar can also diagnose the exact Diagnostic Trouble Codes (DTC) every time your check engine light comes on, and can even clear your check engine light immediately. Each copy of FUZZYCar also gives you a free account on fuzzyluke.com. Now you can keep track of multiple cars, and analyze all of your cars historical diagnostic data. You don't just get a one-time snapshot or spreadsheet, you get to keep track of it all using the FUZZYLUKE analysis engine. Your fuzzyluke.com account will also let you setup email alerts, so that you can keep track of problems as they occur in all of your cars.
PLX Logger 3.0 is free to download, however to use PLX Logger 3.0 with Kiwi Wifi, you'll need to purchase a license. What's nice about PLX Logger 3.0 is that it is compatible with the iPhone/iPod Touch app called DashCommand. Logged data from DashCommand can be downloaded into PLX Logger 3.0 for further detail review.
Kiwi Wifi is used to obtain OBDII data, however if additional sensors are required such as wideband air/fuel ratio, fluid temperature, you can daisy-chain up to 32 PLX Sensor Modules and read it simultaneously with PLX Logger 3.0. This brings the best of both worlds of OBDII interface and high performance dedicated sensors into one application.
*** As mentioned in Sunday Times ingear supplement on the 29th May***
Add to Cart:
Product 3/3
Current Reviews: 0
This product was added to our catalog on Sunday 07 June, 2009.
Customers who bought this product also purchased...
